- “Dashes instead of a number”
- “Right after switching on”
- “Right after a power failure”
Symptom
Liebherr freezer display showing two dashes
Not an error. The freezer temperature display only shows temperatures below freezing, so two dashes mean the compartment has not got there yet.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
Three ordinary causes
What this usually turns out to be
Cheapest and commonest first, which is also the order we check them in. They sit hundreds of dollars apart, and only the unit settles which one is yours.
-
It has just been switched on
Documented behavior. Three to five hours to reach freezing, longer in a warm room.
Alarm and power-failure diagnosis from $145 -
It is recovering from a power failure
The same thing for the same reason.
Alarm and power-failure diagnosis from $145 -
It is genuinely not reaching temperature
If dashes persist well beyond that window, everything on the "freezer not cold enough" page applies.
Refrigerator cooling and defrost repair from $185
In five minutes
Before you call anybody
None of it needs tools, and all of it makes the visit shorter.
-
01
Note the time it was switched on
Three to five hours is the published window.
-
02
Check the room temperature
A hot garage or a closed kitchen in August lengthens it.
-
03
Check it is not standing open
Obvious and worth saying.
How it shows up
What people describe when they call
In more detail
About Liebherr freezer display showing two dashes
The fastest diagnosis is what the appliance is telling you
Wait. From a cold start the maker allows three to five hours depending on the room, and the same applies after a power failure. If it still shows dashes the next morning, then something is genuinely wrong and it is worth a call.
A display doing what it was designed to do
Liebherr states it plainly: the freezer temperature display will only show temperatures that are below freezing, it will take three to five hours depending on ambient conditions for freezing temperatures to be achieved and thus displayed numerically, and this may also occur after a power failure. Three sentences that save a service call.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards
Before you book
Questions about liebherr freezer display showing two dashes
Is it broken?
Almost certainly not, and this is one of the few appliance questions with a documented answer. The display is built to show below-freezing temperatures only. Dashes are not an error message; they are the display saying the number would be above its range.
Where we do it
Across Miami-Dade, Broward, and Palm Beach
Same terms everywhere we go: an on-site diagnostic first, the price agreed in writing, and the exact figure confirmed once we have seen the unit.
Neighborhoods people ask for by name