---
title: "Nothing at all — no display, no light"
description: "Liebherr nothing at all — no display, no light — a completely dead appliance. The maker's own troubleshooting begins with three questions that cost nothing…"
url: "https://liebherrmiami.support/symptoms/appliance-not-turning-on/"
date_modified: "2026-08-27"
Appliance type: "Freezers, Refrigerators, Wine cabinets"
---


# Liebherr nothing at all — no display, no light

### The fastest diagnosis is what the appliance is telling you

Check the breaker properly — off and fully back on — then the outlet and the cord. The maker asks exactly these three things first, and a dead cabinet is more often supply than appliance.

### The maker’s own order, and it is the right one

Is the appliance turned on properly. Is the power cord properly inserted in the outlet. Is the circuit breaker or fuse in operating condition. Three questions, published in Liebherr’s own troubleshooting table, all free, and between them they explain most completely dead appliances.

The circuit breaker or fuse

Named first by the maker. A breaker can look set and have dropped a leg.

The cord not properly seated

Also named. Common after a cabinet has been moved or the kitchen worked on.

The appliance switched off

The maker's first question of all, and it is not a foolish one on cabinets with a soft power control.

The control board

Last, not first, and only after the three above have been proved.

Breaker fully off and back on

Not just looked at.

Test the outlet with something else

Thirty seconds, and it settles the question.

Check the cord at both ends

Especially on a built-in cabinet that has been pulled out at some point.

Start where the maker starts

What it usually means

No display, no light, no sound

Dead since a power event

Dead after the kitchen was worked on

The fastest diagnosis is what the appliance is telling you

Check the breaker properly — off and fully back on — then the outlet and the cord. The maker asks exactly these three things first, and a dead cabinet is more often supply than appliance.

The maker’s own order, and it is the right one

Is the appliance turned on properly. Is the power cord properly inserted in the outlet. Is the circuit breaker or fuse in operating condition. Three questions, published in Liebherr’s own troubleshooting table, all free, and between them they explain most completely dead appliances.

### Everything else in the kitchen works.

Built-in refrigeration frequently has its own circuit, so the rest of the kitchen tells you very little. Check the breaker for the appliance specifically.

### It died right after a power cut.

Check the breaker first — that is exactly when they trip. If the breaker is fine and the outlet is live, then it is the appliance, and a cabinet that died at a power event is a board question more often than a compressor one.

---

**[Read full article: Nothing at all — no display, no light](https://liebherrmiami.support/symptoms/appliance-not-turning-on/)**